Chapter 6.20 DISTRICT STANDARDS
This chapter is included in your selections.
Sections:
- Article I. General Conditions
- 6.20.010 General conditions.
- 6.20.020 Engineer’s status.
- 6.20.030 Inspection of work.
- 6.20.040 Final inspection and acceptance.
- 6.20.050 Materials and facilities.
- 6.20.060 Royalties and patents.
- 6.20.070 Surveys, permits and regulations.
- 6.20.080 Protection of work and property.
- 6.20.090 Existing utilities.
- 6.20.100 Replacing improvements.
- 6.20.110 Access.
- 6.20.120 Rights of various interests.
- 6.20.130 Sanitation.
- 6.20.140 Safety.
- 6.20.150 Future service.
- 6.20.160 Construction conformance.
- 6.20.170 Easements.
- 6.20.180 Pollution and erosion control.
- 6.20.190 Encasement/carrier pipes.
- 6.20.200 Finishing and cleanup.
- 6.20.210 Addressing facilities in existence prior to development.
- 6.20.220 Water and sewer service applications.
- 6.20.230 Early construction utility services.
- 6.20.240 Credit for existing water and/or sewer connections.
- 6.20.250 Deviations.
- Article II. Water Systems
- Article III. Sanitary Sewer Systems
- Article IV. Sewage Lift Stations
- Article V. Cross Connection Control
- 6.20.550 Definitions.
- 6.20.560 Purpose and scope.
- 6.20.570 Authority.
- 6.20.580 Responsibility.
- 6.20.590 Failure to comply – Violations – Penalties.
- 6.20.600 Requirements.
- 6.20.610 Installation and testing – Minimum requirements.
- 6.20.620 Backflow assemblies.
- 6.20.630 Applicability.
- 6.20.640 Administrative procedures.
- Article VI. Standard Details
Prior legislation: Resos. 519, 560, 607, 654, 685, 700.
|
DETAIL SHEET LIST |
|
|---|---|
|
GENERAL DETAILS |
|
|
CROSS CONNECTION |
|
|
WATER DETAILS |
|
|
SEWER DETAILS |
|
|
S22 Sample Chamber for Grease Interceptor and Oil/Water Separator |
|